Search

Green Stake Assemb.

$3.89
Green Landscape Stake Assembly with On/Off Valve and 10 GPH Flow-Controller. Each stake sold separately / Mister NOT included.
Made in the USA
+ -
Videos

Assembly includes a 13-in green stake, vinyl collar, on/off valve, 27-in of green flexible vinyl and a 10 GPH violet flow controller coupler

Use 1 of our various micro-sprays (MLM-404, MLM-236, MLM-15, MLM-05, MLM-44, MLM-14F, MLM-03B, MLM-04, MLM-06, MLM-01, MLM-03, and MLM-02) that are sold separately to give the spray pattern you want

Use the enclosed locking vinyl collar (MLS-CLR) and push onto the 1/4-in vinyl and thread in the micro-spray

Use one of our punch tools (MLA-TOOL or MLA-51) to make a hole into the 1/2-in poly tubing to then snap in the barbed end of the violet coupler

Typically these landscape micro-stake assemblies are placed every 6-ft to 8-ft apart throughout the landscape areas

The on/off valve (MLT-BVA) can be used to decrease the water flow and the distance of the micro-spray pattern along with turning the water supply off to the micro-spray for areas of the landscape with annuals, perennials, or a plant that is no longer in season

 

RECOMMENDATIONS & LIMITATIONS

When installing any irrgation system it is important to be aware of manufacturer recommendations and potential system limitations. Please be aware of the following:

The timer (MLWT-1ZONE, MLWT-TWOZONE or MLWT-EGG) must always be the first thing attached to the faucet, then the backflow prevention valve (MLF-31),pressure regulator (MLA-58),filter (MLFF-41), and then a poly faucet hose fitting (MLF-33)

When winterizing your system, before the first frost completely remove the timer and batteries and store inside

 

MAXIMUM RUNS

1/2-in Poly Tubing - Run up to 300-ft of our 1/2-in Poly Tubing installing up to 50 of our micro spray stake assemblies (MLS-211, MLS-BLA, MLS-TAN) or mister risers (MLS-231) off one faucet

Attach up to 6 of our micro spray kits (MLK-81, MLK-82T, MLK-LGH, or 1 MLK-LGH & 5 MLK-LADD) off one faucet

 

Minimum operating pressure for Micro Spray Stake Assemblies: 15 PSI

Maximum operating pressure for Micro Spray Stake Assemblies: 50 PSI

 

 

 

 

 

 

 

 

 

 

 

 

  

 

 

Customers who bought this item also purchased

1/2" Poly Support Stk. (MLA-57)

Support Stakes for holding 1/2-in Poly Tubing and 1/2-in In-Line Drip Tubing. (Qty 3)
$2.60

8" Extension-stk assembly (MLS-22)

8-in Extension for Micro-Stake Assembly. (Qty 3)
$2.06

165°/180°/320° Fan Spray (MLM-404)

This Green 3 in 1 Swap Top® Mister includes a 165 half circle, a 180 and 320 setting for multiple purposes and situations! (QTY 4)
$3.50

1/2-in Poly Elbow Fitting (MLF-35)

1/2-in Poly Elbow Fitting with locking collars (Qty 1)
$2.09