Search

1/2-in Poly Elbow Fitting

$2.09
1/2-in Poly Elbow Fitting with locking collars (Qty 1)
Made in the USA
+ -
Videos

Use this 1/2-in elbow fitting to run 1/2-in poly in and around tight corners

Typically used where the 1/2-in poly tubing needs to run in a 90° shape in corners of the landscape or garden

To attach the 1/2-in poly tubing first push the collar back to expose the barb with a built in O-ring

Push and wiggle the 1/2-in poly onto the fitting and under the collar until snug

While holding the tubing with 1 hand turn the ears of the collar in a left counter-clockwise motion to tightened and lock onto the 1/2-in poly tubing

Repeat these steps for both sides of this elbow fitting

This fitting can be uninstalled easily by unthreading the collar in a clockwise motion then by pulling off the 1/2-in poly

If you find it difficult to get the 1/2-in poly tubing onto the fitting, use a little olive oil or vegetable oil by wiping it on the inside of the wall of 1/2-in poly then push in the fittings

Customers who bought this item also purchased

1/2" Poly Tee Fitting (MLF-34)

1/2-in Poly Tee Fitting with Locking Collars (QTY 1)
$2.22

Black Stake Assemb (MLS-BLA)

Black Landscape Stake Assembly with On/Off Valve and 10 GPH Flow-Controller. Each stake sold separately / Mister NOT included.
$3.89

Green Stake Assemb. (MLS-211)

Green Landscape Stake Assembly with On/Off Valve and 10 GPH Flow-Controller. Each stake sold separately / Mister NOT included.
$3.89

1/2" Poly Support Stk. (MLA-57)

Support Stakes for holding 1/2-in Poly Tubing and 1/2-in In-Line Drip Tubing. (Qty 3)
$2.60