Search

1/2" pvc to 1/2" poly

$2.09
1/2-in PVC to 1/2-in Poly Tubing Adapter with Locking Collar. (Qty 1)
Made in the USA
+ -

Use this fitting when attaching our 1/2-in poly tubing to run a water supply to micro or drip irrigation off an existing underground irrigation system

Use the 1/2-in male pipe thread side to attach to a 1/2-in female pipe threaded fitting that is attached to the underground-sprinkler system

Attach the 1/2-in poly tubing by first pushing back the locking collar to expose the barb with a built in O-ring

Push and wiggle the 1/2-in poly onto the fitting and under the collar until snug

While holding the tubing with 1 hand turn the ears of the collar in a left counter-clockwise motion to tightened and lock onto the 1/2-in poly tubing

This fitting can be uninstalled easily by unthreading the collar in a clockwise motion then by pulling off the 1/2-in poly

If you find it difficult to get the 1/2-in poly tubing onto the fitting, use a little olive oil or vegetable oil by wiping it on the inside of the wall of 1/2-in poly then push in the fittings

(1 Adapter Per Bag)

Customers who bought this item also purchased

Green Stake Assemb. (MLS-211)

Green Landscape Stake Assembly with On/Off Valve and 10 GPH Flow-Controller. Each stake sold separately / Mister NOT included.
$3.89

1/2" Poly Tee Fitting (MLF-34)

1/2-in Poly Tee Fitting with Locking Collars (QTY 1)
$2.22

1/2-in Poly Elbow Fitting (MLF-35)

1/2-in Poly Elbow Fitting with locking collars (Qty 1)
$2.09

1/2" PVC Elb to 1/2 poly (MLA-P2PELB)

This Retrofit Elbow Adapter has a 1/2-in male pipe thread inlet, and a 1/2-in poly barb outlet with Locking Collar. (Qty 1)
$3.98