With each Patio Kit, there are a total of eight Dripper Stakes. And each Dripper Stake can be adjusted to output from zero to ten gallons of water per hour.
There is, however, one thing you should keep in mind when installing a Mister Landscaper Patio Kit - especially if you want to get the most from it.
If you plan on, at any point, simultaneously running all eight Dripper Stakes wide open (10 GPH), it is imperative that you DO NOT run them in a single line. Instead, you must first use one of the included 1/4" Tees and split the system so that it runs in two directions. By doing this, you make sure each stake is receiving the correct amount of water pressure. For reference, you can simultaneously run up to six stakes wide open.
However, if you plan to vary the flow rates between Stakes, then it is okay to run all eight in a single line.
Alternatively, by expanding the system and using Mister Landscaper 1/2" Poly Tubing as the main line, you can increase the number of Stakes to more than 30.
To do this, install a 25 PSI Pressure Regulator and a Poly Faucet Fitting. Then connect and run the 1/2" Poly Tubing around your patio or deck area. Finally, run a single line of 1/4" Vinyl to each Stake. That's it.
Now you know how to get the most from your Patio Kit.