Use this 1/2-in tee fitting to run 1/2-in poly in opposing directions
Typically used under the water faucet or water source so that the tubing can be run in opposite directions to the landscapes or flower beds
To attach the 1/2-in poly tubing first push the collar back to expose the barb with a built in O-ring
Push and wiggle the 1/2-in poly onto the fitting and under the collar until snug
While holding the tubing with 1 hand turn the ears of the collar in a left counter-clockwise motion to tightened and lock onto the 1/2-in poly tubing
Repeat these steps for all 3 sides of this tee fitting
This fitting can be uninstalled easily by unthreading the collar in a clockwise motion then by pulling off the 1/2-in poly
If you find it difficult to get the 1/2-in poly tubing onto the fitting, use a little olive oil or vegetable oil by wiping it on the inside of the wall of 1/2-in poly then push in the fittings.
Customers who bought this item also purchased
Green Landscape Stake Assembly with On/Off Valve and 10 GPH Flow-Controller. Each stake sold separately / Mister NOT included.
Support Stakes for holding 1/2-in Poly Tubing and 1/2-in In-Line Drip Tubing. (Qty 3)
Black Landscape Stake Assembly with On/Off Valve and 10 GPH Flow-Controller. Each stake sold separately / Mister NOT included.
1/2-in Poly Elbow Fitting with locking collars (Qty 1)