These micro-sprays give a 165 half circle spray pattern with a radius coverage up to 4-ft to 5-ft
Ideal to use this 165 half circle micro-spray to gently water landscapes and gardens along fences, walkways, driveways and the perimeter of house
This unique 165 1/2 circle micro-spray has a slightly less than 180 pattern making it ideal to keep spray from drifting onto the house where your water source may cause staining and or for areas with windy conditions
The wing shape makes it easy-to-thread into the mister-riser assembly or the 1/4-in vinyl and locking collar on top of the micro-stake assembly
When installed on top of our mister-riser assemblies (MLS-231) or any of our micro-stake assemblies (MLS-211, MLS-TAN, or MLS-BLA) this micro-spray will be flow-controlled to only use 10 GPH
(5 Misters Per Bag)
RECOMMENDATIONS & LIMITATIONS
When installing any irrgation system it is important to be aware of manufacturer recommendations and potential system limitations. Please be aware of the following:
The timer ( MLWT-1ZONE, MLWT-TWOZONE or MLWT-EGG) must always be the first thing attached to the faucet, then the backflow prevention valve (MLF-31),pressure regulator (MLA-58),filter (MLFF-41), and then a poly faucet hose fitting (MLF-33)
When winterizing your system, before the first frost completely remove the timer and batteries and store inside
MAXIMUM RUNS
1/2-in Poly Tubing - Run up to 300-ft of our 1/2-in Poly Tubing installing up to 50 of our micro spray stake assemblies (MLS-211, MLS-BLA, MLS-TAN) or mister risers (MLS-231) off one faucet
Attach up to 6 of our micro spray kits (MLK-81, MLK-82T, or MLK-LG) off one faucet
Minimum operating pressure for Micro Spray Stake Assemblies: 15 PSI
Maximum operating pressure for Micro Spray Stake Assemblies: 50 PSI
