100 Count. These Micro-Spray Spinners rotate the water giving a 360° full circle spray pattern with a diameter coverage up to 5-ft-7-ft
Ideal to use this 360 small circle micro-spray in the center of landscapes, flowerbeds, greenhouses, atriums, gardens and small trees
The wing shape makes it easy to thread into the Mister Riser assembly or the 1/4-in vinyl and locking collar on top of the micro-stake assembly
When installed on top of our Mister Riser assemblies (MLS-231) or any of our micro-stake assemblies (MLS-211), (MLS-TAN), or (MLS-BLA) this micro spray will be flow-controlled to only use 10 GPH
(100 Micro Sprays per bag)
(Micro Sprays made in the USA)
RECOMMENDATIONS & LIMITATIONS
When installing any irrigation system it is important to be aware of manufacturer recommendations and potential system limitation. Please be aware of the following: The Timer (MLWT-1ZONE), (MLWT-TWOZONE), or (MLWT-EGG) must always be the first thing attached to the faucet , then the Backflow prevention valve, Pressure Regulator (MLA-58), Filter (MLFF-41), and then a Poly Faucet Hose Fitting (MLF-33)
When winterizing your system, before the first frost, completely remove the Timer and batteries and store inside. You can use our Winterizing Plug (MLA-WHTPLUG) to seal off the 1/2-in poly tubing for the winter.
MAXIMUM RUNS
1/2-in Poly Tubing - Run up to 300-ft of our 1/2-in Poly tubing installing up to 50 of our Micro Spray Stake Assemblies (MLS-211), (MLS-BLA), (MLS-TAN) or Mister Risers (MLS-231) off one faucet
Attach up to 6 of our Micro Spray Kits (MLK-81), or (MLK-82T)
Minimum operating pressure for Micro Spray Stake Assemblies: 15 PSI
Maximum operating pressure for Micro Spray Stake Assemblies: 50 PSI
