Don't settle for the same old stepping stones you find at your local hardware store.
Make it your own by adding your personal touch. Is all you need is a cake pan, contact paper, ready mix concrete, rubber gloves, Vaseline, chicken wire, sponge, bucket, varnish and your personal selection of marbles, glass, rocks and anything else you might like to add. You can also make new pieces by breaking up old china or glass.
Be sure to use protective gloves and eye ware before you start hammering. Now you will need to rub the inside of your cake pan down with Vaseline to prevent the cement from sticking.
Next you cut out the contact paper into the shape and size of your cake pan. Place the contact paper in the bottom of the cake pan with the sticky side up. Place your rocks, glass and marbles onto the contact paper face down creating your own personal design. Now you are ready to mix your concrete. find an old bucket and pour enough concrete into the bucket to fill your cake pan.
Next you need to slowly add water and stir the concrete with a long spoon until it is the consistency of cake batter.
Do not get the concrete on your skin. If it does get on your skin wash it off right away. If you leave it on your skin it will start to burn. Fill the cement to the top of the cake pan. Now place a square or circle piece of chicken wire into the cement and press it about half way down.
Don't cut the wire too big or it will be sticking out the sides of your stepping stone.
Allow the cement to harden then you are ready to remove your personal stepping stone.
You can use a sponge to clean your stone and use the extra cement to fill in any air bubbles. Finally you can varnish your stone to keep it nice and shiny.