100 Count. This Mister is an ideal choice for watering plants at the root zone only, and not the foliage and has a spray pattern up to 4-ft full circle
When installed on top of our Mister Riser assemblies (MLS-231) or any of our Micro Stake assemblies (MLS-211), (MLS-TAN), or (MLS-BLA), this micro spray will be flow-controlled to only use 10 GPH
(100 Micro Sprays per Bag)
Made in the USA
RECOMMENDATIONS & LIMITATIONS
When installing any irrigation system it is important to be aware of manufacturer recommendations and potential system limitations. Please be aware of the following:
The Timer (MLWT-1ZONE), (MLWT-TWOZONE), OR (MLWT-EGG) must always be the first thing attached to the faucet, then the Backflow prevention device if needed, then the Pressure Regulator (MLA-58), Filter (MLFF-41), and then our Poly Faucet Hose Fitting (MLF-33)
When Winterizing your system, before the first frost, completely remove the timer and batteries and store inside. You can use our Winterizing Plug (MLA-WHTPLUG) to seal off your 1/2-in poly tubing for the winter.
MAXIMUM RUNS
1/2-in Poly Tubing - Run up to 300-ft of our 1/2-in Poly Tubing installing up to 50 of our Micro Spray Stake Assemblies (MLS-211), (MLS-BLA), or (MLS-TAN) or Mister Risers (MLS-231) off one faucet.
Attach up to 6 of our Micro Spray Kits (MLK-81) or (MLK-82T) off one faucet
Minimum operating pressure for Micro Spray Stake Assemblies: 15 PSI
Maximum operating pressure for Micro Spray Stake Assemblies: 50 PSI
