This brown 1/4-in in-line drip tubing has a 1/2 GPH dripper molded into the 1/4-in tubing every 12 inches, which allows water to steadily drip out of both of the 2 holes on opposing sides of the embedded dripper to give a total of .5 GPH
As a lead in water supply to this 1/4-in in-line drip tubing use our 1/2-in poly tubing or our 1/4-in vinyl tubing
Use any of our 1/4-in adapters with this 1/4-in in-line drip tubing
Tubing is made with UV blocking resins capable of withstanding years of exposure in any environment
1/4-in In-Line Drip Tubing is great for all sorts of landscape applications, but it's particularly well suited for use in row gardens
This product is flexible enough to be snaked around landscapes, wrapped around trees, and customized in any number of ways
If more water is needed, you can add in a few Add-A-Drippers (MLD-AAD) or loop the line around the area that is in need of more water
Drippers and Drip Tubing should NEVER be buried underground but can be covered lightly with Mulch
RECOMMENDATIONS & LIMITATIONS
When installing any irrgation system it is important to be aware of manufacturer recommendations and potential system limitations. Please be aware of the following:
A 25 PSI pressure regulator (MLD-25PR) and a faucet filter (MLFF-41) are highly recommended to be used first at the water source when using the 1/2 GPH in-line drip tubing
MAXIMUM RUNS
Run up to 300-ft of our 1/2-in poly tubing and attach up to a total of 500-ft of the 1/4-in In-Line Drip Tubing connecting individual runs with a maximum of 50-ft runs of our 1/4-in in-Line Drip Tubing that has a built-in .5 GPH dripper every 12 inches. Each seperate line of 1/4-in In-Line Drip Tubing can have up to a 15-ft lead-in of our 1/4-in vinyl tubing between the 1/2-in poly and the 1/4-in In-Line Drip Tubing
Minimum operating pressure for In-Line Drip Tubing: 5 to 7 PSI
Maximum operating pressure for In-Line Drip Tubing: 25 PSI
