100 Count. This mister is an ideal choice for watering the ends of walkways or narrow landscape and has an end-strip spray pattern up to 4-ft
This Micro Spray provides a narrow directional spray.
When installed on top of our Mister Riser assemblies (MLS-231)or any of our Micro-Stake assemblies (MLS-211), (MLS-TAN), or (MLS-BLA), this Micro Spray will be flow-controlled to only use 10 GPH
(100 Micro Sprays per Bag)
(Made in the USA)
RECOMMENDATIONS & LIMITATIONS
When installing any irrigation system it is important to be aware of manufacturer recommendations and potential system limitations. Please be aware of the following:
The Timer (MLWT-1ZONE), (MLWT-TWOZONE), or (MLWT-EGG) must always be the first thing attached to the faucet, then the Backflow device if needed, then the Pressure Regulator (MLA-58), Filter (MLFF-41), and then a Poly Faucet Hose Fitting (MLF-33)
When winterizing your system, beforethe first frost, completely remove the timer and batteries and store inside. You can use our Winterizing Plug (MLA-WHTPLUG) to seal off your 1/2-in poly tubing for the winter.
MAXIMUM RUNS
1/2-in Poly Tubing - Run up to 300-ftof our 1/2-in Poly tubing installing up to 50 of our Micro Stake assemblies (MLS-211), (MLS-BLA), (MLS-TAN) or Mister Risers (MLS-231) off one faucet
Attach up to 6 of our Micro Spray Kits (MLK-81) or (MLK-82T) off one faucet
Minimum operating pressure for Micro Spray Stake Assemblies: 15 PSI
Maximum operating pressure for Micro Spray Stake Assemblies: 50 PSI
