100 Count. These Micro- Sprays give a large 360 x 14 full circle stream spray pattern and a diameter coverage up to 13-ft-16-ft
Ideal to use this 360° large circle micro-spray in the center of large landscapes, along hillsides, large trees and performs great in windy conditions
The angle of the spray has a slight upward arc to help increase the distance of the water pattern to cover large areas
When installed on top of our Mister Riser assemblies (MLS-231) or any of our Micro-Stake assemblies(MLS-211), (MLS-TAN), or (MLS-BLA), this micro spray will be flow-controlled to only use 10 GPH
(100 Micro Sprays per Bag)
Micro Spray Made in the USA
RECOMMENDATIONS & LIMITATIONS
When installing any irrigation system it is important to be aware of manufacturer recommendations and potential system limitations. Please be aware of the following:
The Timer (MLWT-1ZONE), (MLWT-TWOZONE) OR (MLWT-EGG) must always be the first thing attached to the faucet, the the Backflow device if needed, then the Pressure Regulator (MLA-58), Filter (MLFF-41) and then a Poly Faucet Hose Fitting (MLF-33)
When winterizing your system, before the first frost, completely remove the timer and batteries and store inside.
MAXIMUM RUNS
1/2-in Poly Tubing - Run up to 300-ft of our 1/2-in Poly Tubing installing up to 50 of our Micro Spray Stake Assemblies (MLS-211), (MLS-BLA), (MLS-TAN) or Mister Risers (MLS-231) off one faucet
Attach up to 6 of our Micro Spray Kits (MLK-81) or (MLK-82T) off one faucet
Mimimum operating pressure for Micro Spray Stake Assemblies: 15 PSI
Maximum operating pressure for Micro Spray Stake Assemblies: 50 PSI
