This mister is an ideal choice for watering the ends of walkways or narrow landscape and has an end-strip spray pattern up to 4-ft
When installed on top of our Mister Riser Assemblies (MLS-231) or any of our Micro-Stake Assemblies (MLS-211), (MLS-TAN), or (MLS-BLA), this micro spray will be flow- controlled to only use 10 GPH
(5 Misters Per Bag)
(Made in the USA)
RECCOMENDATIONS & LIMITATIONS
When installing any irrigation system, it is important to be aware of manufacturer recommendations and potential system limitations. Please be aware of the following:
The Timer (MLWT-1ZONE), (MLWT-TWOZONE) OR (MLWT-EGG) must always be the first thing attached to the faucet, then the Pressure Regulator (MLA-58), followed by the Filter (MLFF-41) and then a Poly Faucet Hose Fitting (MLF-33)
When winterizing your system, before the first frost, completely remove the timer and batteries and store inside. You may use our Winterizing Plug (MLA-WHTPLUG) to seal off your poly tubing line for winter
MAXIMUM RUNS
1/2-in Poly Tubing - Run up to 300-ft of our 1/2-in Poly Tubing installing up to 50 of our Micro Spray Stake Assemblies (MLS-211), (MLS-BLA), (MLS-TAN) or Mister Risers (MLS-231) off one faucet.
Attach up to 6 of our Micro Spray Kits (MLK-81) or (MLK-82T), or (MLK-LG)
Minimum operating pressure for Micro Spray Stake Assemblies: 15 PSI
Maximum operating pressure for Micro Spray Stake Assemblies: 50 PSI
