Micro Spray kit 50ft

Part # MLK-82T
Micro Sprinkler Landscape & Shrub Kit with 5 Tan Stake Assemblies covering up to 250 sq. ft. (Each kit sold individually.)
Made in the USA
+ -

Micro-spray starter landscaper kit to water up to 250-sq ft of landscapes, gardens, shrubs, trees and more/1-zone-automatic-water-timer-qty-1

Kit includes a product guide showing the benefits and uses of a Mister Landscaper low-volume irrigation system with 1 50-ft roll of 1/2-in Poly Tubing (MLT-71),5 Green Landscape Stake Assemblies (MLS-211) with our 3-in-1 spray misters (MLM-404), 6 additional misters (MLM-236, MLM-15, MLM-05, MLM-44, MLM-04, MLM-03B),1 1/2-in Poly Faucet Coupling (MLF-33), 1 1/2-in Poly Tee Fitting (MLF-34), 2 1/2-in Poly End Crimpers (MLA-50), 1 Hole Punch Tool (MLA-51) and 4 Goof Plugs (MLA-51G) that are needed to hook this system up



When installing any irrgation system it is important to be aware of manufacturer recommendations and potential system limitations. Please be aware of the following:

The timer (MLWT-1ZONE, MLWT-TWOZONE or MLWT-EGG) must always be the first thing attached to the faucet, then the backflow prevention valve (MLF-31),pressure regulator (MLD-25PR or MLA-58),filter (MLFF-41), and then the poly faucet hose fitting (MLF-33)



Run up to 300-ft of our 1/2-in Poly Tubing installing up to 50 of our Micro Spray Stake Assemblies (MLS-211, MLS-BLA, or MLS-TAN) or Mister Risers (MLS-231) off one faucet

Run up to 300-ft of our 1/2-in Poly Tubing installing up to 30 of our Micro Spray Stake Assemblies  (MLS-211, MLS-BLA, or MLS-TAN) & less than 10 drippers off one faucet. If you want to run more than 10 drippers and have 30 micro sprays stake assemblies installed then replace each 10 GPH micro spray spray stake assembly with either 20 .5 GPH drippers (MLD-.5PC), 10 1 GPH drippers (MLD-PC1) or 5 2 GPH drippers (MLD-2PC)

Attach up to 6 of our Micro Spray Kits per single faucet


Minimum operating pressure for Timer: 15 PSI

Maximum operating pressure for Timer: 50 PSI

Customers who bought this item also purchased

Tan Stake Assemb (MLS-TAN)

Tan Landscape Stake Assembly with On/Off Valve and 10 GPH Flow-Controller. Each stake sold separately / Mister NOT included.

1/2" Poly Support Stk. (MLA-57)

Support Stakes for holding 1/2-in Poly Tubing and 1/2-in In-Line Drip Tubing. (Qty 3)

1/2-in Poly Elbow Fitting (MLF-35)

1/2-in Poly Elbow Fitting with locking collars (Qty 1)

8" Extension-stk assembly (MLS-22)

8-in Extension for Micro-Stake Assembly. (Qty 3)