This Quick Fix Kit is perfect to have on hand when you need that additional fitting, part, or just a quick fix.
Everything included comes in a convenient, easy to store tackle box that can be easily refilled with your favorite drip and micro irrigation parts for quick access.
The All-In-One Tool (MLA-TOOL) in this kit makes it easy to work with the 1/4-in fittings that are included in the kit, and it also has a Cleaning Tool (MLA-CLEAN) attached to clean the Micro Sprays and the older model of our Violet Flow Controllers. This All-in-One Tool is ergonomically designed to make snapping a hole into the 1/2-in Poly Tubing even easier. The tool has guides to slide over the 1/2-in Poly Tubing to help hold it into place and also act as a safety shield to the sharp hole punch tip. The kit also includes 12 Goof Plugs (MLA-51G) to plug a hole made by accident in the 1/2-in Poly Tubing or to move an existing Stake Assembly to another location.
Use the 10 1/4-in Couplers (MLT-BXB) to extend or repair cuts in the 1/4-in Vinyl Tubing and the 1/4-in In-Line Drip Tubing (MLD-QDT100). Use the 3 1/4-in Tees (MLT-TEE) to split the 1/4-in Tubing and run opposing ways to extend the 1/4-in Vinyl out. Use the 3 1/4-in Elbows (MLT-ELB) to turn the 1/4-in Tubing in a 90 degree angle. Included in the kit is 1 of our 1/4-in On/Off Valves (MLT-BVA) and these are ideal for shutting off water flow to Micro Sprays or Drippers.
Inside the kit are 4 Bonus Newly Designed Violet Flow Restrictors (MLS-V10), Use these to replace the damaged Violet Flow Controllers on any of the Micro Sprinkler Stake Assemblies. This new and improved Restrictor minimizes clogging as it does not contain a diaphragm. The Kit also includes 1 of our older model Violet Flow Controllers (MLS-V10-OLD) and replacement diaphragM (MLS-DIA) for this older model if the orginal one becomes damaged.
Use the 2 1/2-in Couplers (MLF-36) to extend or repair cuts in the 1/2-in Poly Tubing and the 1/2-in In-Line Drip Tubing.
Use the 4 1/2-in End Crimpers (MLA-50) to end the 1/2-in Poly Tubing.
Kit has 1 each of all the Micro Sprays (MLM-05, MLM-15, MLM-236, MLM-404, MLM-03B, MLM-44) to use for replacements or to try out a new spray pattern, 3 8-in Stake Extensions (MLS-22) to add height to the Micro Spray on the Stake Assembly, and 1 of our Micro Spray Pot Stakes (MLS-POTSTK) for watering a potted plant. There are also 4 of our Vinyl Collars (MLS-CLR) to help hold the Micro Spray in place on the Stake Assembly.
Includes 1 each of all our drippers (MLD-.5PC, MLD-AAD, MLD-PC1, MLD-2PC, MLD-ADB), and an Adjustable Dripper Stake (MLD-STA) to use as replacements or to try out a new dripper.
Kit has 1 1/2-in Support Stake (MLA-57) to securely hold down the 1/2-in Poly Tubing or the 1/2-in In-Line Drip Tubing, and 3 of our 1/4-in Support Stakes (MLT-DST) to securely hold our 1/4-in Vinyl Tubing or the 1/4-in In-Line Drip Tubing in place.
