Vegetable Garden Drip Kit

Part # MLK-VEG
UPC: 720413400845
Vegetable Garden Drip Irrigation Kit covering up to 100-ft of vegetable rows. (Each kit sold individually)
Made in the USA
+ -

All inclusive drip starter kit with everything needed to attach to an outside faucet and water up to 100-ft of Vegetable rows

Includes all outdoor faucet attachments to hook up and run 50-ft of 1/2-in poly tubing to Vegetable garden area

Includes all the components to attach and run from 1/2-in poly maximum runs of 33-ft of the 1/4-in in-line drip tubing down a row of vegetables

0.5 GPH drippers are molded into the 1/4-in tubing every 12-in

5 of the 1/4-in on/off valves can be used to turn on and off water supply to the 1/4-in in-line drip tubing that runs to the various seasonal vegetables

Expandable by attaching 3 more of these kits together or by purchasing up to 3 extra rolls of 1/4-in in-line drip tubing (MLD-QDT100< to add on to this kit for a total of 400 linear feet

Drippers and Drip Tubing should NEVER be buried



When installing any irrgation system it is important to be aware of manufacturer recommendations and potential system limitations. Please be aware of the following:

A 25 PSI pressure regulator (MLD-25PR) and a faucet filter (MLFF-41) are highly recommended to be used first at the water source when using the 1/2 GPH in-line drip tubing



Run up to 300-ft of our 1/2-in poly tubing and attach up to a total of 500-ft of the 1/4-in In-Line Drip Tubing connecting individual runs with a maximum of 50-ft runs of our 1/4-in in-Line Drip Tubing that has a built-in .5 GPH dripper every 12 inches. Each seperate line of 1/4-in In-Line Drip Tubing can have up to a 15-ft lead-in of our 1/4-in vinyl tubing between the 1/2-in poly and the 1/4-in In-Line Drip Tubing


Minimum operating pressure for In-Line Drip Tubing: 5 to 7 PSI

Maximum operating pressure for In-Line Drip Tubing: 25 PSI

Customers who bought this item also purchased

1/4" vinyl On/Off Valve (MLT-BVA)

1/4-in On/Off Valve for 1/4-in Vinyl Tubing and 1/4-in In-Line Drip Tubing (QTY 3)

1/4" support stake (MLT-DST)

1/4-in Vinyl Support Stakes to hold down 1/4-in Vinyl Tubing (QTY 10)

1/2-in Poly Elbow Fitting (MLF-35)

1/2-in Poly Elbow Fitting with locking collars (Qty 1)

1/2" Poly Support Stk. (MLA-57)

Support Stakes for holding 1/2-in Poly Tubing and 1/2-in In-Line Drip Tubing. (Qty 3)