.5 GPH Add-A-Drip

.5 GPH In-Line Add-A-Drippers with a 1/4-in Coupler & a Goof Plug (QTY 5) (QTY 1) (QTY 1)
+ -

Use these 0.5 GPH Add-A-Drippers to slowly and gently water window boxes of flowers, rows of vegetables, potted plants and tree rings

These 0.5 GPH Add-A-Drippers are in-line drippers that drip in the center so they can be added together using 1/4-in vinyl tubing to make a line of drip

Push the red barb of the dripper into the end of the 1/4-in vinyl then attach to other end of the vinyl onto the black barb of the dripper

Use the enclosed 1/4-in coupler to attach the 1/4-in vinyl to the 1/2-in poly tubing

Repeat this last step until you have up to 30 of these drippers installed off a single 30-ft line of 1/4-in vinyl from the 1/2-in poly tubing

After the last dripper is installed,turn on the water and allow the flow of water to clean out any debris that may have entered the line during installation and then put a short 2-in piece of vinyl on the black barb end of the dripper and then push in the enclosed goof plug to end the 1/4-in line

Our 1/4-in support stakes (MLT-DST) can be used to securely hold the 1/4-in vinyl along the row of plants

Also use our 1/4-in tees (MLT-TEE) and elbows (MLT-ATE) to run the 1/4-in vinyl in opposing directions or in tight corners to supply water to these drippers

(5 Drippers / 1 Coupler / 1 Goof Plug Per Bag)

Drippers and Drip Tubing should NEVER be buried



When installing any irrigation system it is important to be aware of manufacturer recommendations and potential system limitations. Please be aware of the following:

A 25 PSI pressure regulator (MLD-25PR) and a faucet filter (MLFF-41) are highly recommended to be used first at the water source when using these 0.5 GPH Add-A-Drippers



1/4-in Vinyl Tubing - When installing, you can run up to 30-ft of 1/4-in Vinyl from the 1/2-in Poly and install up to 30 Drippers in a single line

1/2-in Poly Tubing - Run up to 300-ft of our 1/2-in Poly Tubing and connect up to 13 individual 30-ft runs of our 1/4-in Vinyl Tubing, installing up to 30 of our 0.5 GPH Add-A-Drippers per individual run 

Minimum operating pressure for Drippers:  5 PSI

Maximum operating pressure for Drippers:  25 PSI

Product tags
Customers who bought this item also purchased

1/4" support stake (MLT-DST)

1/4-in Vinyl Support Stakes to hold down 1/4-in Vinyl Tubing (QTY 10)

.5 GPH PC DripPER (MLD-.5PC)

.5 GPH drippers w/ 1/4-in Couplers. (Qty 4 of each)

Adjustable Drip Stakes (MLD-STA)

Adjustable Dripper Stakes with 1/4-in Couplers (Qty 3)

Black Stake Assemb (MLS-BLA)

Black Landscape Stake Assembly with On/Off Valve and 10 GPH Flow-Controller. Each stake sold separately / Mister NOT included.